PLASTITE ALTERNATIVE SCREW – HEX WASHER HEAD
48°-2 THREAD
Thread Type : Inch-size screws are comparable to PLASTITE screws. Tribular thread-rolling screw with extra wide spacing between 48° profile thread; twin lead threads with a 1-2 thread point taper.
| CODE | SPEC (DIA) | SPEC (LENGTH) | WIDTH ACROSS FLATS | HEAD HEIGHT | WASHER DIA | DRIVE | MATERIAL | FINISHING |
| STPLAHW | #4 | 1/4″ / 5/16″ / 3/8″ | 0.181-0.188 | 0.049-0.060 | 0.225-0.243 | hex | Steel / Stainless Steel | Zinc Clear Trivalent Cr3+ / Passivated |
| STPLAHW | #6 | 1/4″ / 3/8″ / 1/2″ / 3/4″ / 1″ | 0.244-0.250 | 0.080-0.093 | 0.302-0.328 | hex | ||
| STPLAHW | #8 | 1/4″ / 3/8″ / 1/2″ / 3/4″ / 1″ / 1-1/2″ | 0.244-0.250 | 0.096-0.110 | 0.322-0.348 | hex | ||
| STPLAHW | #10 | 3/8″ / 1/2″ / 3/4″ / 1″ / 1-1/2″ | 0.305-0.312 | 0.105-0.120 | 0.384-0.414 | hex | ||
| STPLAHW | #12 | 1/2″ / 3/4″ / 1″ / 1-1/4″ / 1-1/2″ | 0.305-0.312 | 0.139-0.155 | 0.398-0.432 | hex | ||
| STPLAHW | #1/4 | 1/2″ / 3/4″ / 1″ / 1-1/4″ / 1-1/2″ / 2″ | 0.367-0.375 | 0.172-0.190 | 0.480-0.520 | hex |