SET SCREW – SLOTTED DRIVE
DIN 551/553 / ASME B18.6.2
Thread Type : A straight shank fastener with external threads designed to travel through a hole or nut that’s pre-tapped to make a mating thread for the screw.
| CODE | STANDARD | SPEC (DIA) | SPEC (LENGTH) | POINT TYPE | DIAGRAM | MATERIAL | FINISHING |
| STSETSOCF | DIN 551 | M3 | 3/4/5/6/8/10/12/16/20 | FLAT POINT |  | Steel / Stainless Steel | Black Oxide / Zinc Clear Trivalent Cr3+ / Passivated / |
| STSETSOCF | M4 | 4/5/6/8/10/12/16/20 | |||||
| STSETSOCF | M5 | 5/6/8/10/12/16/20/25 | |||||
| STSETSOCF | M6 | 6/8/10/12/16/20/25/30/35 | |||||
| STSETSOCF | M8 | 8/10/12/16/20/25/30/35/40 | |||||
| STSETSOCF | M10 | 10/12/16/20/25/30/35/40 | |||||
| STSETSOCF | M12 | 16/20/25/30/35/40 | |||||
| STSETSOCC | DIN 553 | M3 | 4/5/6/8/10/12/14/16 | CONE POINT |  | ||
| STSETSOCC | M4 | 5/6/8/10/12/14/16/20 | |||||
| STSETSOCC | M5 | 6/8/10/12/14/16/20/25 | |||||
| STSETSOCC | M6 | 8/10/12/14/16/20/25/30 | |||||
| STSETSOCC | M8 | 10/12/14/16/20/25/30/35/40 | |||||
| STSETSOCC | M10 | 12/14/16/20/25/30/35/40/45/50 | |||||
| STSETSOCC | M12 | 14/16/20/25/30/35/40/45/50/55/60 | |||||
| STSETSOCCUP | ASME B18.6.2 | #6 | 1/8″ / 3/16″ / 1/4″ / 3/8″ / 1/2″ | CUP POINT |  | ||
| STSETSOCCUP | #8 | 1/8″ / 3/16″ / 1/4″ / 3/8″ / 1/2″ | |||||
| STSETSOCCUP | #10 | 3/16″ / 1/4″ / 3/8″ | |||||
| STSETSOCCUP | #1/4 | 1/4″ / 3/8″ / 1/2″ | |||||
| STSETSOCCUP | #5/16 | 3/8″ / 1/2″ | |||||
| STSETSOCCUP | #3/8 | 3/8″ / 1/2″ |
*OTHER POINTS SUCH AS OVAL POINT, DOG POING AND CONE POINT FOR INCH SERIES ARE AVAILABLE UPON REQUEST.